Tag: APIC

It’s one of those articles aimed at the people with Cisco ACI experience who don’t bother with reading all the install and other guides again while going through n’th time of building and ACI fabric, like me. When it comes to Cisco ACI, you really should.

There’s a small change with the physical build of the third generation of APIC server where 10G SFP interfaces from APIC towards the Leaf switches (used for fabric discovery and later for the in-band controller to fabric communication) where 4x10G card is built in the server and not like 2x10G on M2/L2 and other first and second generation of APICs.

When you see those 4x10G ports on the server, the logical thing to do will be to use the first two ports on each APIC and connect them to two Leafs (for redundancy and stuff). It ended up being that is not really how Cisco intended those interfaces to be used and it will end up blowing your fabric stability and management. I was able to discover the fabric and register the fabric leaf and spines. It was even possible to configure the whole thing up to the functional fabric and L2-L3 functions but the APIC cluster was always unstable and going in and out of configuration stale and data diverged statuses on cluster view.

Hello World

This is an overview of what I think Cisco ACI actually is. It uses some examples from the lab environment to show you how the things look like when you start to work with ACI. There are other articles in the works which will be online soon and which will go in details through the real configuration of ACI and best practices while doing it.

What is this Cisco ACI Fabric?

Cisco ACI is a datacenter network Fabric. It actually means that it is a networking system of more networking L3 switches that have a modified, next-generation OS which enables them to be centrally provisioned and configured through APIC controller to work as one device from access port perspective.

The view at Cisco ACI APIC GUI where we see complete ACI Fabric Topology