Tag: CoPP

I already wrote about Control Plane Protection in one of my previous posts focused on Cisco device configuration. Here we will make the same thing on Juniper device, I was using Juniper SRX300 and Juniper SRX1500 devices in my lab.

CoPP ??

Control Plane Protection (CoPP) is a method of protecting processor unit, running services on your network device, against excessive flooding. Excessive flooding of traffic aimed towards your router/firewall processor, being that valid or malicious, is always undesirable and can also be dangerous.

A network device, which starts the receive more control traffic that his processor can process, will eventually experience control traffic packet drops and it will lead to some of the router functions to become unstable. Some of the most common control traffic generating services on a router are routing protocols with different update packets, Spanning Tree with BPDU packets, HSRP, CDP, ARP, and different management traffic services like SSH, SNMP, RADIUS etc.

Some of those control plane traffic types are more important than others but they all have in common the fact that they don’t normally use much bandwidth to function. Having that in mind, it is easy to conclude that the situation above with router processor at 100% because of control plane traffic is most surely caused by a DDoS attack towards your device.

More unusual is the situation when a neighboring device is experiencing some kind of malfunction which makes him send large amounts of control plane traffic out of his interfaces towards your device.

CoPP is the best way to avoid this kind of attacks or malfunctions to get in the way of your network device stability. CoPP is basically configuration of QoS inbound to your device control plane (CPU).

CoPP Best Practices

The way to configure CoPP in the most stable and effective way is to use guaranteed minimal available bandwidth for each control plane traffic type.

CoPP – Control Plane Protection or better Control Plain Policing. It is the only option to make some sort of flood protection or QoS for traffic going to control plane.

In the router normal operation the most important traffic is control plain traffic. Control plane traffic is traffic originated on router itself by protocol services running on it, destined to other router device on the network. In order to run properly, routers need to speak with each other. They speak with each other by rules defined in protocols and protocols are running in shape of router services.

Examples for this kind of protocols are routing protocols like BGP, EIGRP, OSPF or some other non-routing protocols like CDP etc..

When router is making BGP neighbour adjacency with the neighbouring router, it means that both routers are running BGP protocol service on them. BGP service is generating control plane traffic, sending that traffic to BGP neighbour and receiving control plane traffic back from the neighbour.

Usage of Control Plane Protection is important on routers receiving heavy traffic of which to many packets are forwarded to Control Plane. In that case, we can filter traffic based on predefined priority classes that we are free to define based on our specific traffic pattern.